From b348b5f9124d28fe6ccc620253ba414fb08f3933 Mon Sep 17 00:00:00 2001 From: Treeki Date: Sat, 26 Mar 2011 02:30:11 +0100 Subject: added .o support to Kamek, and a separate project for Newer with codehandler --- src/newer_codehandler.o | Bin 0 -> 10292 bytes src/newer_codehandler.s | 1763 +++++++++++++++++++++++++++++++++++++++++++++++ src/wm_map.cpp | 2 - 3 files changed, 1763 insertions(+), 2 deletions(-) create mode 100644 src/newer_codehandler.o create mode 100755 src/newer_codehandler.s (limited to 'src') diff --git a/src/newer_codehandler.o b/src/newer_codehandler.o new file mode 100644 index 0000000..33d3e9d Binary files /dev/null and b/src/newer_codehandler.o differ diff --git a/src/newer_codehandler.s b/src/newer_codehandler.s new file mode 100755 index 0000000..7834089 --- /dev/null +++ b/src/newer_codehandler.s @@ -0,0 +1,1763 @@ +.text + +.set r0,0; .set r1,1; .set r2,2; .set r3,3; .set r4,4 +.set r5,5; .set r6,6; .set r7,7; .set r8,8; .set r9,9 +.set r10,10; .set r11,11; .set r12,12; .set r13,13; .set r14,14 +.set r15,15; .set r16,16; .set r17,17; .set r18,18; .set r19,19 +.set r20,20; .set r21,21; .set r22,22; .set r23,23; .set r24,24 +.set r25,25; .set r26,26; .set r27,27; .set r28,28; .set r29,29 +.set r30,30; .set r31,31; .set f0,0; .set f2,2; .set f3,3 + +.globl _start + +gameid: +.long 0,0 +cheatdata: +.long frozenvalue +.space 39*4 + +_start: + stwu r1,-168(r1) # stores sp + stw r0,8(r1) # stores r0 + + mflr r0 + stw r0,172(r1) # stores lr + + mfcr r0 + stw r0,12(r1) # stores cr + + mfctr r0 + stw r0,16(r1) # stores ctr + + mfxer r0 + stw r0,20(r1) # stores xer + + stmw r3,24(r1) # saves r3-r31 + + mfmsr r25 + ori r26,r25,0x2000 #enable floating point ? + andi. r26,r26,0xF9FF + mtmsr r26 + + + stfd f2,152(r1) # stores f2 + stfd f3,160(r1) # stores f3 + + + + lis r31,_start@h #0x8000 + + lis r20, 0xCC00 + lhz r28, 0x4010(r20) + ori r21, r28, 0xFF + sth r21, 0x4010(r20) # disable MP3 memory protection + + bl _codehandler + +_setvalues: + #lis r31,_start@h #0x8000 + li r21,0 + li r22,0x19 + li r23,0xD0 + lis r24,0xCD00 + + ori r18, r31, frozenvalue@l # read buffer just store in lowmem + lwz r0,172(r1) # loads lr + stw r0,4(r18) # stores lr + stw r21, 0x643C(r24) # exi speed up + +frozen: + bl exireceivebyte + beq finish # r3 returns 1 or 0, one for byte received ok + +checkcommand: + + cmpwi r29, 0x04 # checks lf 8/1/32 bits write command + bge _nextcommand + cmpwi r29, 0x01 + blt finish + b writedword #write value to address +_nextcommand: + beq readmem + cmpwi r29, 0x06 + beq freezegame + cmpwi r29, 0x07 + beq unfreezegame + cmpwi r29, 0x08 + beq resumegame + cmpwi r29, 0x09 + beq breakpoints #ibp + cmpwi r29, 0x10 + beq breakpoints #dbp + cmpwi r29, 0x2F + beq upbpdata + cmpwi r29, 0x30 + beq getbpdata + cmpwi r29, 0x38 + beq cancelbreakpoints + cmpwi r29, 0x40 + beq sendcheats + cmpwi r29, 0x41 + beq uploadcode + cmpwi r29, 0x44 + beq breakpoints #step + cmpwi r29, 0x50 + beq pausestatus + cmpwi r29, 0x60 + beq executecodes + cmpwi r29, 0x89 + beq breakpoints #aligned dbp + cmpwi r29, 0x99 + beq versionnumber + b finish + +#****************************************************************** +# subroutine: getpausestatus: +# one running, two paused, three on a breakpoint +#****************************************************************** + +pausestatus: + lwz r3,0(18) + bl exisendbyte + b finish + + +#****************************************************************** +# subroutine: executecodes: +# executes the code handler +#****************************************************************** + +executecodes: + bl _codehandler + b finish + + +#****************************************************************** +# subroutine: freezegame: +# Write a 1 to a memory location to freeze +#****************************************************************** + +freezegame: + li r4, 1 + stw r4, 0(r18) + b finish + +#****************************************************************** +# subroutine: upload bp data: +# receive the dp databuffer from the PC +#****************************************************************** + +upbpdata: + bl exisendbyteAA + + li r16, 40*4 # 42 "registers rN" * 4 + ori r12, r31, regbuffer@l + b upload + +#****************************************************************** +# subroutine: getbp data: +# send the dp databuffer to the PC +#****************************************************************** + +getbpdata: + li r3, 72*4 # register buffer + ori r12, r31, regbuffer@l + bl exisendbuffer # send it, less than a packet + b finish + + +#****************************************************************** +# subroutine: breakpoints: +# handles data/instruction address breakpoints +#****************************************************************** + +breakpoints: + + cmpwi cr6,r29,0x10 # 0x10=instruction, 0x09/0x89=data + cmpwi cr5,r29,0x44 # 0x44=step + + ori r4,r31,bphandler@l #used for writebranch (=source address) + + lis r3,0x8000 + ori r3,r3,0x300 # bprw 0x80000300 + bl writebranch + + addi r3,r3,0xA00 # trace 0x80000D00 + bl writebranch + + addi r3,r3,0x600 # bpx 0x80001300 + bl writebranch + + ori r12, r31, bpbuffer@l # read buffer just store in lowmem + + stw r21,0(r12) # clears inst bp + stw r21,4(r12) # clears data bp + stw r21,8(r12) # clears alignement + + ori r4, r31, regbuffer@l + lwz r9,0x18(r4) + + lwz r3,0(r18) + cmpwi r3,2 # checks if the gecko is on a breakpoint + bne +12 + beq cr5,+12 + b bp + li r3,0 + stw r3,12(r12) # if not, clears the previous "broken on" address + + bne bp + + bne cr5,bp + ori r9,r9,0x400 + stw r9,0x18(r4) + b unfreezegame + +bp: + rlwinm r9,r9,0,22,20 + stw r9,0x18(r4) + beq cr5,finish + beq cr6,+8 + addi r12,r12,4 # if databp r12=r12+4 + + li r3, 4 # 4 bytes + bl exireceivebuffer + + ble cr6,noalignement # if not aligned data bp (0x89) + + addi r12,r12,4 + + li r3, 4 # 4 bytes + bl exireceivebuffer + +noalignement: + ori r4, r31, bpbuffer@l # read buffer just store in lowmem + + lwz r3, 0(r4) # inst bp + lwz r4, 4(r4) # data bp + mtspr 1010, r3 # set IABR + mtspr 1013, r4 # set DABR + b finish + +#****************************************************************** +# subroutine: bphandler +# Data/Instruction address breakpoint handler, save context and return +#****************************************************************** + +bphandler: + mtsprg 2,r1 # sprg2 = r1 + mfsrr0 r1 # r1=srr0 + mtsprg 3,r3 # sprg3 = r3 + mfsrr1 r3 # r3=srr1 + + rlwinm r3,r3,0,22,20 # clear trace + stw r3,regbuffer@l+0x18(r0) # store srr1 with trace cleared in regbuffer + rlwinm r3,r3,0,24,15 + ori r3,r3,0x2000 +# rlwinm r3,r3,0,17,15 # clear hw interrupt + mtsrr1 r3 # restore srr1 with hw interrupt & trace cleared + + lis r3,break@h + ori r3,r3,break@l + mtsrr0 r3 + rfi + +break: + lis r3, regbuffer@h + ori r3, r3, regbuffer@l + stw r1,0x14(r3) #stores srr0 + + mr r1,r3 + mfsprg r3,3 + stmw r2,0x24(r1) #saves r2-r31 + mr r4,r1 + mfsprg r1,2 + + stw r0,0x1C(r4) + stw r1,0x20(r4) + + mflr r3 + stw r3, 0x9C(r4) # Store LR + + mfcr r3 + stw r3, 0x0(r4) # Store CR + + mfxer r3 + stw r3, 0x4(r4) # Store XER + + mfctr r3 + stw r3, 0x8(r4) # Store CTR + + mfdsisr r3 + stw r3, 0xC(r4) # Store DSISR + + mfdar r3 + stw r3, 0x10(r4) # Store DAR + + li r9,0 + mtspr 1010,r9 # Clear IABR + mtspr 1013,r9 # Clear DABR + + lis r5,floatstore@h + ori r5,r5,floatstore@l # Set r5 to instruction address + lis r31,0xD004 + ori r31,r31,0x00A0 # Set r31 to 'stfs f0,0xA0(r4)' (==0xD00400A0) +floatloop: + stw r31,0(r5) + dcbst r0,r5 + sync + icbi r0,r5 + isync +floatstore: + stfs f0,0xA0(r4) + addi r31,r31,4 # Advance instruction offset + addis r31,r31,0x20 # Advance instruction register + rlwinm. r16,r31,0,5,5 # Check for register > 31 + beq floatloop + +skip_floating_point: + + lis r31,_start@h # 0x8000 + + ori r5,r31,bpbuffer@l + + lwz r16,0(r5) # inst bp + lwz r17,4(r5) # data bp + lwz r19,12(r5) # counter for alignment + + cmpwi r19,0 + beq _redobp + + cmpwi r19,2 + bne +24 + lwz r9,0x14(r4) + addi r9,r19,3 + stw r9,0(r5) # inst bp + stw r9,12(r5) # counter for alignment + b _executebp + + cmpw r16,r19 + beq _step + + cmpw r17,r19 + beq _step + + add r9,r16,r17 + stw r9,12(r5) # counter for alignment + + +_alignementcheck: + lwz r16,8(r5) # bp alignment check + cmpwi r16,0 + beq _executebp # no alignement = normal break + + lwz r3,0x10(r4) + cmpw r16,r3 # we check if address = aligned address + bne _step # if no, we need to set a bp on the next instruction + + li r16,0 + stw r16,8(r5) # if we are on the good address we clear the aligned bp check + b _executebp # and we break + +_step: + li r17,0 + stw r17,12(r5) # counter for alignment + lwz r9,0x18(r4) + ori r9,r9,0x400 + stw r9,0x18(r4) + b _skipbp #and we don't break right now + +_redobp: + mtspr 1010,r16 # we set back the instbp with the original value + mtspr 1013,r17 # we set back the databp with the original value + li r9,1 + stw r9,12(r5) # counter for alignment + b _skipbp # and we don't break + +_executebp: + li r5, 2 + ori r4, r31, frozenvalue@l # Freeze once returned to let user know there is a breakpoint hit + stw r5, 0(r4) + + li r3, 0x11 + bl exisendbyte # tell the PC a bp has happened (send 0x11) + + bl _start # bl mainloop, so you can set up a new breakpoint. + +_skipbp: + mfmsr r1 + rlwinm r1,r1,0,31,29 + rlwinm r1,r1,0,17,15 + mtmsr r1 # we disable the interrupt so nothing interfers with the restore + + ori r1, r31, regbuffer@l + + lwz r3,0x0(r1) + mtcr r3 # restores CR + lwz r3,0x14(r1) + mtsrr0 r3 # restores SRR0 + lwz r3,0x18(r1) + mtsrr1 r3 # restores SRR1 + lwz r3,0x9C(r1) + mtlr r3 # restores LR + + lmw r2,0x24(r1) # restores r2-r31 + + lwz r0,0x1C(r1) # restores r0 + lwz r1,0x20(r1) # restores r1 + + + rfi # back to the game + +#****************************************************************** +# subroutine: unfreezegame: +# Write a 0 to a memory location to unfreeze +#****************************************************************** + +unfreezegame: + stw r21, 0(r18) + b resumegame + +#****************************************************************** +# subroutine: write dword: +# Write a long word value to memory sent from PC +#****************************************************************** + +writedword: + cmpwi cr5,r29,2 + li r3, 8 # 8 bytes (location 4 / Value 4) + + ori r12, r31, dwordbuffer@l # buffer + bl exireceivebuffer + + lwz r5, 0(r12) + lwz r3, 4(r12) # read the value + stb r3, 0(r5) # write to location + blt cr5,skipp + sth r3, 0(r5) # write to location + beq cr5,skipp + stw r3, 0(r5) # write to location + skipp: + dcbf r0, r5 # data cache block flush + sync + icbi r0, r5 + isync + b finish + +#****************************************************************** +# subroutine: SendCheats : +# Fill memory with value +#****************************************************************** + +sendcheats: + bl exisendbyteAA + + li r3, 4 # 4 bytes + ori r12, r31, dwordbuffer@l # buffer + bl exireceivebuffer + + lwz r16, 0(r12) + + lis r12, codelist@h + ori r12, r12, codelist@l + + b upload + +#****************************************************************** +# subroutine: Upload : +# Fill memory with value +#****************************************************************** + +uploadcode: + bl exisendbyteAA + + li r3, 8 # 8 bytes + ori r12, r31, dwordbuffer@l # buffer + + bl exireceivebuffer + + lwz r16, 4(r12) + lwz r12, 0(r12) + +upload: + ori r27, r31, rem@l # Remainder of bytes upload code + li r17,0xF80 + bl _packetdivide + beq douploadremainder + +nextrecpacket: + mr r3,r17 + bl exireceivebuffer # r12 start = start of buffer + +uploadwait: + bl exisendbyteAA + beq uploadwait + add r12,r12,r14 + + subic. r11, r11, 1 # decrease loop counter + bgt nextrecpacket + +douploadremainder: # send the remainder bytes + lwz r3, 0(r27) # remainder + cmpwi r3,0 + beq finishupload + bl exireceivebuffer +finishupload: + dcbf r0, r12 # data cache block flush + sync + icbi r0, r12 # instruction cache block flush + isync + b finish + +#****************************************************************** +# subroutine: exireceivebyte: +# Return 1(r3) if byte receive, 0(r3) if no byte +# Command byte is stored at 0x800027ff +#****************************************************************** + +exireceivebyte: + mflr r30 + lis r3, 0xA000 # EXI read command + + bl checkexisend + + andis. r3, r16, 0x800 + rlwinm r29,r16,16,24,31 + mtlr r30 + blr + +#****************************************************************** +# subroutine: checkexisend: +# +#****************************************************************** + +checkexisend: + + stw r23, 0x6814(r24) # 32mhz Port B + stw r3, 0x6824(r24) + stw r22, 0x6820(r24) # 0xCC006820 (Channel 1 Control Register) + +exicheckreceivewait: + lwz r5, 0x6820(r24) + andi. r5, r5, 1 + bne exicheckreceivewait # while((exi_chan1cr)&1); + + lwz r16, 0x6824(r24) + stw r5, 0x6814(r24) + + blr + +#****************************************************************** +# subroutine: exireceivebuffer: +# r3 byte counter, r12 points to buffer, r3 gets copied as gets destroyed +#****************************************************************** + +exireceivebuffer: + mflr r10 # save link register + mtctr r3 # counter + li r14,0 + +bufferloop: + bl exicheckreceive + bl exicheckreceive + bl exireceivebyte + beq bufferloop # r3 returns 1 or 0, one for byte received ok + + stbx r29, r14,r12 # store byte into buffer + + addi r14, r14, 1 # increase buffer by 1 + bdnz bufferloop + + mtlr r10 # retore link register + blr # return to command check + +#****************************************************************** +# exisendbuffer: +# r3 byte counter, r12 points to buffer, r3 gets copied as gets destroyed +#****************************************************************** + +exisendbuffer: + mflr r10 # save link register + mtctr r3 # r3->counter + li r14,0 + +sendloop: + bl exichecktx + beq sendloop + lbzx r3, r12,r14 + bl exisendbyte + beq sendloop + + addi r14, r14, 1 # increase buffer + bdnz sendloop + mtlr r10 # restore link register + blr + +#****************************************************************** +# exisendbyte:12345678 +# r3 byte to send, returns 1 if sent, 0 if fail (!!! called by breakpoint) +#****************************************************************** +exisendbyteAA: + li r3,0xAA + +exisendbyte: # r3, send value + mflr r30 + slwi r3, r3, 20 # (sendbyte<<20); + oris r3, r3, 0xB000 # 0xB0000000 | (OR) + li r22,0x19 + li r23,0xD0 + lis r24,0xCD00 + + bl checkexisend + + extrwi. r3, r16, 1,5 # returns either 0 or 1, one for byte received ok + mtlr r30 + blr + +#****************************************************************** +# subroutine: exicheckrecieve: +# Return 1(r3) lf byte receive, 0(r3) lf no byte +#****************************************************************** + +exicheckreceive: + mflr r30 +exicheckreceive2: + lis r3, 0xD000 # EXI check status command + + bl checkexisend + + rlwinm. r3,r16,6,31,31 # returns either 0 or 1 for r3 + + beq exicheckreceive2 + mtlr r30 + blr + +#****************************************************************** +# exichecktx:12345678 +# returns 1 if ok to send, 0 if not +#****************************************************************** +exichecktx: # r3, send value + mflr r30 + lis r3, 0xC000 + li r22,0x09 + li r23,0xD0 + lis r24,0xCD00 + + bl checkexisend + + extrwi. r3, r16, 1,5 # returns either 0 or 1, one for byte received ok + mtlr r30 + blr + +#****************************************************************** +# Readmem: (reads a memory range back to PC) +# r3 byte to send, returns 1 lf sent, 0 lf fail +#****************************************************************** + +readmem: + bl exisendbyteAA + + li r3, 8 # 8 bytes + ori r12, r31, dwordbuffer@l # buffer + + bl exireceivebuffer + + lwz r5, 4(r12) + lwz r12, 0(r12) + + ori r27, r31, rem@l # place holder for remainder bytes + + ori r17, r21, 0xF800 # 64K packet + sub r16, r5, r12 # memrange = (*endlocation - *startlocation) + + bl _packetdivide + +nextsendpacket: + bgt transfer #compares r11 and 0 + lwz r17, 0(r27) # remainder + cmpwi r17,0 + beq finish +transfer: + mr r3,r17 # number of bytes + bl exisendbuffer + +bytewait1: + bl exicheckreceive + bl exicheckreceive + bl exireceivebyte + beq bytewait1 # r3 returns 1 or 0, one for byte received ok + cmpwi r29, 0xCC # cancel code + beq finish + cmpwi r29, 0xBB # retry code + beq transfer + cmpwi r29, 0xAA + bne bytewait1 + add r12,r12,r14 + subic. r11, r11, 1 # decrease loop counter + blt finish + b nextsendpacket + +#****************************************************************** +# Cancel Breakpoints +# Clears instruction and data and step breakpoints +#****************************************************************** + +cancelbreakpoints: + mtspr 1013, r21 # clear the DABR + mtspr 1010, r21 # clear the IABR + ori r4, r31, regbuffer@l + lwz r9,0x18(r4) + rlwinm r9,r9,0,22,20 + stw r9,0x18(r4) + b finish + +#****************************************************************** +# subroutine: version number +# Sends back the current gecko version number. +#****************************************************************** + +versionnumber: + li r3, 0x80 #0x80 = Wii, 0x81 = NGC + bl exisendbyte + #b finish + +#****************************************************************** +# Finish +# Check if the gecko has been paused. if no return to game +#****************************************************************** + +finish: + lwz r4, 0(r18) + cmpwi r4, 0 # check to see if we have frozen the game + bne frozen # loop around if we have + # (changed to return for the bp) + +resumegame: + + sth r28,0x4010(r20) # restore memory protection value + + lfd f2,152(r1) # loads f2 + lfd f3,160(r1) # loads f3 + + mfmsr r25 + + lwz r0,172(r1) + mtlr r0 # restores lr + + lwz r0,12(r1) + mtcr r0 # restores cr + + lwz r0,16(r1) + mtctr r0 # restores ctr + + lwz r0,20(r1) + mtxer r0 # restores xer + + lmw r3,24(r1) # restores r3-r31 + + lwz r0,8(r1) # loads r0 + + addi r1,r1,168 + + isync + + blr # return back to game + +#****************************************************************** +# Write branch +# r3 - source (our mastercode location) +# r4 - destination (lowmem area 0x80001800 address which will branch to +#****************************************************************** +writebranch: + + subf r17, r3, r4 # subtract r3 from r4 and place in r17 + lis r5, 0x4800 # 0x48000000 + rlwimi r5,r17,0,6,29 + stw r5, 0(r3) # result in r3 + + dcbf r0, r3 # data cache block flush + sync + icbi r0, r3 + isync + + blr # return + + +#****************************************************************** +# Packet Divide +# Used by the down/up routines to calculate the number of packet to send +#****************************************************************** + +_packetdivide: + divw. r11, r16, r17 # fullpackets = memrange / 0xF80 (r11 is full packets) + mullw r10, r11, r17 + subf r10, r10, r16 # r10 holds remainder byte counter + stw r10, 0(r27) # store remainder + blr + +#================================================================== + +_codehandler: + mflr r29 + lis r15, codelist@h + ori r15, r15, codelist@l + + ori r7, 31, cheatdata@l # set pointer for storing data (before the codelist) + + lis r6,0x8000 # default base address = 0x80000000 (code handler) + + mr r16,r6 # default pointer =0x80000000 (code handler) + + li r8,0 # code execution status set to true (code handler) + + lis r3,0x00D0 + ori r3,r3,0xC0DE + + lwz r4,0(r15) + cmpw r3,r4 + bne- _exitcodehandler + lwz r4,4(r15) + cmpw r3,r4 + bne- _exitcodehandler # lf no code list skip code handler + addi r15,r15,8 + b _readcodes +_exitcodehandler: + mtlr r29 + blr + + + +_readcodes: + + lwz r3,0(r15) #load code address + lwz r4,4(r15) #load code value + + addi r15,r15,8 #r15 points to next code + + andi. r9,r8,1 + cmpwi cr7,r9,0 #check code execution status in cr7. eq = true, ne = false + + li r9,0 #Clears r9 + + rlwinm r10,r3,3,29,31 #r10 = extract code type, 3 bits + rlwinm r5,r3,7,29,31 #r5 = extract sub code type 3 bits + + andis. r11,r3,0x1000 #test pointer + rlwinm r3,r3,0,7,31 #r3 = extract address in r3 (code type 0/1/2) #0x01FFFFFF + + bne +12 #jump lf the pointer is used + + rlwinm r12,r6,0,0,6 #lf pointer is not used, address = base address + b +8 + + mr r12,r16 #lf pointer is used, address = pointer + + + cmpwi cr4,r5,0 #compares sub code type with 0 in cr4 + + cmpwi r10,1 + blt+ _write #code type 0 : write + beq+ _conditional #code type 1 : conditional + + cmpwi r10,3 + blt+ _ba_pointer #Code type 2 : base address operation + + beq- _repeat_goto #Code type 3 : Repeat & goto + + cmpwi r10,5 + blt- _operation_rN #Code type 4 : rN Operation + beq+ _compare16_NM_counter #Code type 5 : compare [rN] with [rM] + + cmpwi r10,7 + blt+ _hook_execute #Code type 6 : hook, execute code + + b _terminator_onoff_ #code type 7 : End of code list + +#CT0=============================================================== +#write 8bits (0): 00XXXXXX YYYY00ZZ +#write 16bits (1): 02XXXXXX YYYYZZZZ +#write 32bits (2): 04XXXXXX ZZZZZZZZ +#string code (3): 06XXXXXX YYYYYYYY, d1d1d1d1 d2d2d2d2, d3d3d3d3 .... +#Serial Code (4): 08XXXXXX YYYYYYYY TNNNZZZZ VVVVVVVV + +_write: + add r12,r12,r3 #address = (ba/po)+(XXXXXX) + cmpwi r5,3 + beq- _write_string #r5 == 3, goto string code + bgt- _write_serial #r5 >= 4, goto serial code + + bne- cr7,_readcodes #lf code execution set to false skip code + + cmpwi cr4,r5,1 #compares sub code type and 1 in cr4 + + bgt- cr4,_write32 #lf sub code type == 2, goto write32 + + #lf sub code type = 0 or 1 (8/16bits) + rlwinm r10,r4,16,16,31 #r10 = extract number of times to write (16bits value) + +_write816: + beq cr4,+16 #lf r5 = 1 then 16 bits write + stbx r4,r9,r12 #write byte + addi r9,r9,1 + b +12 + sthx r4,r9,r12 #write halfword + addi r9,r9,2 + subic. r10,r10,1 #number of times to write -1 + bge- _write816 + b _readcodes + +_write32: + rlwinm r12,r12,0,0,29 #32bits align adress + stw r4,0(r12) #write word to address + b _readcodes + +_write_string: #endianess ? + mr r9,r4 + bne- cr7,_skip_and_align #lf code execution is false, skip string code data + + + _stb: + subic. r9,r9,1 #r9 -= 1 (and compares r9 with 0) + blt- _skip_and_align #lf r9 < 0 then exit + lbzx r5,r9,r15 + stbx r5,r9,r12 #loop until all the data has been written + b _stb + +_write_serial: + + addi r15,r15,8 #r15 points to the code after the serial code + bne- cr7,_readcodes #lf code execution is false, skip serial code + + lwz r5,-8(r15) #load TNNNZZZZ + lwz r11,-4(r15) #r11 = load VVVVVVVV + + rlwinm r17,r5,0,16,31 #r17 = ZZZZ + rlwinm r10,r5,16,20,31 #r10 = NNN (# of times to write -1) + rlwinm r5,r5,4,28,31 #r5 = T (0:8bits/1:16bits/2:32bits) + + +_loop_serial: + cmpwi cr5,r5,1 + beq- cr5,+16 #lf 16bits + bgt+ cr5,+20 #lf 32bits + + stbx r4,r9,r12 #write serial byte (CT04,T=0) + b +16 + + sthx r4,r9,r12 #write serial halfword (CT04,T=1) + b +8 + + stwx r4,r9,r12 #write serial word (CT04,T>=2) + + add r4,r4,r11 #value +=VVVVVVVV + add r9,r9,r17 #address +=ZZZZ + subic. r10,r10,1 + bge+ _loop_serial #loop until all the data has been written + + b _readcodes + +#CT1=============================================================== +#32bits conditional (0,1,2,3): 20XXXXXX YYYYYYYY +#16bits conditional (4,5,6,7): 28XXXXXX ZZZZYYYY + +#PS : 31 bit of address = endlf. + +_conditional: + rlwinm. r9,r3,0,31,31 #r10 = (bit31 & 1) (endlf enabled?) + + beq +16 #jump lf endlf is not enabled + + rlwinm r8,r8,31,1,31 #Endlf (r8>>1) + andi. r9,r8,1 #r9=code execution status + cmpwi cr7,r9,0 #check code execution status in cr7 + cmpwi cr5,r5,4 #compares sub code type and 4 in cr5 + cmpwi cr3,r10,5 #compares code type and 5 in cr3 + + rlwimi r8,r8,1,0,30 #r8<<1 and current execution status = old execution status + bne- cr7,_true_end #lf code execution is set to false -> exit + + bgt cr3,_addresscheck2 #lf code type==6 -> address check + add r12,r12,r3 #address = (ba/po)+(XXXXXX) + + + + blt cr3,+12 #jump lf code type <5 (==1) + blt cr5,_condition_sub #compare [rN][rM] + b _conditional16_2 #counter compare + bge cr5,_conditional16 #lf sub code type>=4 -> 16 bits conditional + +_conditional32: + rlwinm r12,r12,0,0,29 #32bits align + lwz r11,0(r12) + b _condition_sub + +_conditional16: + rlwinm r12,r12,0,0,30 #16bits align + lhz r11,0(r12) +_conditional16_2: + nor r9,r4,r4 + rlwinm r9,r9,16,16,31 #r9 = extract mask + and r11,r11,r9 #r11 &= r9 + rlwinm r4,r4,0,16,31 #r4 = extract data to check against + +_condition_sub: + cmpl cr6,r11,r4 #Unsigned compare. r11=data at address, r4=YYYYYYYY + andi. r9,r5,3 + beq _skip_NE #lf sub code (type & 3) == 0 + cmpwi r9,2 + beq _skip_LE #lf sub code (type & 3) == 2 + bgt _skip_GE #lf sub code (type & 3) == 3 + +_skip_EQ:#1 + bne- cr6,_true_end #CT21, CT25, CT29 or CT2D (lf !=) + b _skip + +_skip_NE:#0 + beq- cr6,_true_end #CT20, CT24, CT28 or CT2C (lf==) + b _skip + +_skip_LE:#2 + bgt- cr6,_true_end #CT22, CT26, CT2A or CT2E (lf r4>[]) + b _skip + +_skip_GE:#3 + blt- cr6,_true_end #CT23, CT27, CT2B or CT2F (lf r4 5 + blt cr5,_readcodes + lwz r11,-8(r15) #load counter + bne cr7,_clearcounter #lf previous code execution false clear counter + andi. r12,r3,0x8 #else lf clear counter bit not set increase counter + beq _increase_counter + andi. r12,r8,0x1 #else lf.. code result true clear counter + beq _clearcounter + + +_increase_counter: + addi r12,r11,0x10 #else increase the counter + rlwimi r11,r12,0,12,27 #update counter + b _savecounter + +_clearcounter: + rlwinm r11,r11,0,28,11 #clear the counter +_savecounter: + stw r11,-8(r15) #save counter + b _readcodes + + +#CT2=============================================================== + +#load base adress (0): 40TYZ00N XXXXXXXX = (load/add:T) ba from [(ba/po:Y)+XXXXXXXX(+rN:Z)] + +#set base address (1): 42TYZ00N XXXXXXXX = (set/add:T) ba to (ba/po:Y)+XXXXXXXX(+rN:Z) + +#store base address (2): 440Y0000 XXXXXXXX = store base address to [(ba/po)+XXXXXXXX] +#set base address to (3): 4600XXXX 00000000 = set base address to code address+XXXXXXXX +#load pointer (4): 48TYZ00N XXXXXXXX = (load/add:T) po from [(ba/po:Y)+XXXXXXXX(+rN:Z)] + +#set pointer (5): 4ATYZ00N XXXXXXXX = (set/add:T) po to (ba/po:Y)+XXXXXXXX(+rN:Y) + +#store pointer (6): 4C0Y0000 XXXXXXXX = store pointer to [(ba/po)+XXXXXXXX] +#set pointer to (7): 4E00XXXX 00000000 = set pointer to code address+XXXXXXXX + +_ba_pointer: + + bne- cr7,_readcodes + + + rlwinm r9,r3,2,26,29 #r9 = extract N, makes N*4 + + rlwinm r14,r3,16,31,31 #r3 = add ba/po flag bit (Y) + cmpwi cr3,r14,0 + + cmpwi cr4,r5,4 #cr4 = compare sub code type with 4 (ba/po) + andi. r14,r5,3 #r14 = sub code type and 3 + + cmpwi cr5,r14,2 #compares sub code type and 2 + + blt- cr5,_p01 + beq- cr5,_p2 #sub code type 2 + +_p3: + extsh r4,r3 + add r4,r4,r15 #r4=XXXXXXXX+r15 (code location in memory) + b _pend + +_p01: + + rlwinm. r5,r3,20,31,31 #r3 = rN use bit (Z) + beq +12 #flag is not set(=0), address = XXXXXXXX + + lwzx r9,r7,r9 #r9 = load register N + add r4,r4,r9 #flag is set (=1), address = XXXXXXXX+rN + + beq cr3,+8 #(Y) flag is not set(=0), address = XXXXXXXX (+rN) + + add r4,r12,r4 #address = XXXXXXXX (+rN) + (ba/po) + + + cmpwi cr5,r14,1 + beq cr5,+8 #address = (ba/po)+XXXXXXXX(+rN) + lwz r4,0(r4) #address = [(ba/po)+XXXXXXXX(+rN)] + + rlwinm. r3,r3,12,31,31 #r5 = add/replace flag (T) + beq _pend #flag is not set (=0), (ba/po)= XXXXXXXX (+rN) + (ba/po) + bge cr4,+12 + add r4,r4,r6 #ba += XXXXXXXX (+rN) + (ba/po) + b _pend + add r4,r4,r16 #po += XXXXXXXX (+rN) + (ba/po) + b _pend + + + +_p2: + rlwinm. r5,r3,20,31,31 #r3 = rN use bit (Z) + beq +12 #flag is not set(=0), address = XXXXXXXX + + lwzx r9,r7,r9 #r9 = load register N + add r4,r4,r9 #flag is set (=1), address = XXXXXXXX+rN + + bge cr4,+12 + stwx r6,r12,r4 #[(ba/po)+XXXXXXXX] = base address + b _readcodes + stwx r16,r12,r4 #[(ba/po)+XXXXXXXX] = pointer + b _readcodes + + +_pend: + bge cr4,+12 + mr r6,r4 #store result to base address + b _readcodes + mr r16,r4 #store result to pointer + b _readcodes + + +#CT3=============================================================== +#set repeat (0): 6000ZZZZ 0000000P = set repeat +#execute repeat (1): 62000000 0000000P = execute repeat +#return (2): 64S00000 0000000P = return (lf true/false/always) +#goto (3): 66S0XXXX 00000000 = goto (lf true/false/always) +#gosub (4): 68S0XXXX 0000000P = gosub (lf true/false/always) + + +_repeat_goto: + rlwinm r9,r4,3,25,28 #r9 = extract P, makes P*8 + addi r9,r9,0x40 #offset that points to block P's + cmpwi r5,2 #compares sub code type with 2 + blt- _repeat + + + rlwinm. r11,r3,10,0,1 #extract (S&3) + beq +20 #S=0, skip lf true, don't skip lf false + bgt +8 + b _b_bl_blr_nocheck #S=2/3, always skip (code exec status turned to true) + beq- cr7,_readcodes #S=1, skip lf false, don't skip lf true + b _b_bl_blr_nocheck + + +_b_bl_blr: + bne- cr7,_readcodes #lf code execution set to false skip code + +_b_bl_blr_nocheck: + cmpwi r5,3 + + bgt- _bl #sub code type >=4, bl + beq+ _b #sub code type ==3, b + +_blr: + lwzx r15,r7,r9 #loads the next code address + b _readcodes + +_bl: + stwx r15,r7,r9 #stores the next code address in block P's address +_b: + extsh r4,r3 #XXXX becomes signed + rlwinm r4,r4,3,9,28 + + add r15,r15,r4 #next code address +/-=line XXXX + b _readcodes + + + +_repeat: + bne- cr7,_readcodes #lf code execution set to false skip code + + add r5,r7,r9 #r5 points to P address + bne- cr4,_execute_repeat #branch lf sub code type == 1 + +_set_repeat: + rlwinm r4,r3,0,16,31 #r4 = extract NNNNN + stw r15,0(r5) #store current code address to [bP's address] + stw r4,4(r5) #store NNNN to [bP's address+4] + + b _readcodes + +_execute_repeat: + lwz r9,4(r5) #load NNNN from [M+4] + cmpwi r9,0 + beq- _readcodes + subi r9,r9,1 + stw r9,4(r5) #saves (NNNN-1) to [bP's address+4] + lwz r15,0(r5) #load next code address from [bP's address] + b _readcodes + +#CT4=============================================================== +#set/add to rN(0) : 80SY000N XXXXXXXX = rN = (ba/po) + XXXXXXXX +#load rN (1) : 82UY000N XXXXXXXX = rN = [XXXXXXXX] (offset support) (U:8/16/32) +#store rN (2) : 84UYZZZN XXXXXXXX = store rN in [XXXXXXXX] (offset support) (8/16/32) + +#operation 1 (3) : 86TY000N XXXXXXXX = operation rN?XXXXXXXX ([rN]?XXXXXXXX) +#operation 2 (4) : 88TY000N 0000000M = operation rN?rM ([rN]?rM, rN?[rM], [rN]?[rM]) + +#copy1 (5) : 8AYYYYNM XXXXXXXX = copy YYYY bytes from [rN] to ([rM]+)XXXXXXXX +#copy2 (6) : 8CYYYYNM XXXXXXXX = copy YYYY bytes from ([rN]+)XXXXXX to [rM] + + +#for copy1/copy2, lf register == 0xF, base address is used. + +#of course, sub codes types 0/1, 2/3 and 4/5 can be put together lf we need more subtypes. + + +_operation_rN: + + bne- cr7,_readcodes + + rlwinm r11,r3,2,26,29 #r11 = extract N, makes N*4 + add r26,r7,r11 #1st value address = rN's address + lwz r9,0(r26) #r9 = rN + + rlwinm r14,r3,12,30,31 #extracts S, U, T (3bits) + + beq- cr4,_op0 #lf sub code type = 0 + + cmpwi cr4,r5,5 + bge- cr4,_op56 #lf sub code type = 5/6 + + cmpwi cr4,r5,3 + bge- cr4,_op34 #lf sub code type = 3/4 + + + cmpwi cr4,r5,1 + +_op12: #load/store + rlwinm. r5,r3,16,31,31 #+(ba/po) flag : Y + beq +8 #address = XXXXXXXX + add r4,r12,r4 + + cmpwi cr6,r14,1 + bne- cr4,_store + +_load: + bgt+ cr6,+24 + beq- cr6,+12 + + lbz r4,0(r4) #load byte at address + b _store_reg + + lhz r4,0(r4) #load halfword at address + b _store_reg + + lwz r4,0(r4) #load word at address + b _store_reg + +_store: + + rlwinm r19,r3,28,20,31 #r9=r3 ror 12 (N84UYZZZ) + +_storeloop: + bgt+ cr6,+32 + beq- cr6,+16 + + stb r9,0(r4) #store byte at address + addi r4,r4,1 + b _storeloopend + + sth r9,0(r4) #store byte at address + addi r4,r4,2 + b _storeloopend + + stw r9,0(r4) #store byte at address + addi r4,r4,4 +_storeloopend: + subic. r19,r19,1 + bge _storeloop + b _readcodes + + +_op0: + rlwinm. r5,r3,16,31,31 #+(ba/po) flag : Y + beq +8 #value = XXXXXXXX + add r4,r4,r12 #value = XXXXXXXX+(ba/po) + + + + andi. r5,r14,1 #add flag : S + beq _store_reg #add flag not set (=0), rN=value + add r4,r4,r9 #add flag set (=1), rN=rN+value + b _store_reg + + + + + +_op34: #operation 1 & 2 + + + rlwinm r10,r3,16,30,31 #extracts Y + + rlwinm r14,r4,2,26,29 #r14 = extract M (in r4), makes M*=4 + + add r19,r7,r14 #2nd value address = rM's address + bne cr4,+8 + subi r19,r15,4 #lf CT3, 2nd value address = XXXXXXXX's address + + + lwz r4,0(r26) #1st value = rN + + lwz r9,0(r19) #2nd value = rM/XXXXXXXX + + + andi. r11,r10,1 #lf [] for 1st value + beq +8 + mr r26,r4 + + + andi. r11,r10,2 #lf [] for 2nd value + beq +16 + mr r19,r9 + bne+ cr4,+8 + add r19,r12,r19 #lf CT3, 2nd value address = XXXXXXXX+(ba/op) + + + + rlwinm. r5,r3,12,28,31 #operation # flag : T + + + cmpwi r5,9 + bge _op_float + + +_operation_bl: + bl _operation_bl_return + +_op450: + add r4,r9,r4 #N + M + b _store_reg + +_op451: + mullw r4,r9,r4 #N * M + b _store_reg + +_op452: + or r4,r9,r4 #N | M + b _store_reg + +_op453: + and r4,r9,r4 #N & M + b _store_reg + +_op454: + xor r4,r9,r4 #N ^ M + b _store_reg + +_op455: + slw r4,r9,r4 #N << M + b _store_reg + +_op456: + srw r4,r9,r4 #N >> M + b _store_reg + +_op457: + rlwnm r4,r9,r4,0,31 #N rol M + b _store_reg + +_op458: + sraw r4,r9,r4 #N asr M + +_store_reg: + stw r4,0(r26) #Store result in rN/[rN] + b _readcodes + +_op_float: + cmpwi r5,0xA + bgt _readcodes + + lfs f2,0(r26) #f2 = load 1st value + lfs f3,0(r19) #f3 = load 2nd value + beq- _op45A + + +_op459: + fadds f2,f3,f2 #N = N + M (float) + b _store_float + +_op45A: + fmuls f2,f3,f2 #N = N * M (float) + +_store_float: + stfs f2,0(r26) #Store result in rN/[rN] + b _readcodes + +_operation_bl_return: + mflr r10 + rlwinm r5,r5,3,25,28 #r5 = T*8 + add r10,r10,r5 #jumps to _op5: + r5 + + lwz r4,0(r26) #load [rN] + lwz r9,0(r19) #2nd value address = rM/XXXXXXXX + + mtlr r10 + blr + + +#copy1 (5) : 8AYYYYNM XXXXXXXX = copy YYYY bytes from [rN] to ([rM]+)XXXXXXXX +#copy2 (6) : 8CYYYYNM XXXXXXXX = copy YYYY bytes from ([rN]+)XXXXXX to [rM] + +_op56: + + bne- cr7,_readcodes #lf code execution set to false skip code + + rlwinm r9,r3,24,0,31 #r9=r3 ror 8 (NM8AYYYY, NM8CYYYY) + mr r14,r12 #r14=(ba/po) + bl _load_NM + + beq- cr4,+12 + add r17,r17,r4 #lf sub code type==0 then source+=XXXXXXXX + b +8 + add r9,r9,r4 #lf sub code type==1 then destination+=XXXXXXXX + + rlwinm. r4,r3,24,16,31 #Extracts YYYY, compares it with 0 + li r5,0 + + _copy_loop: + beq _readcodes #Loop until all bytes have been copied. + lbzx r10,r5,r17 + stbx r10,r5,r9 + addi r5,r5,1 + cmpw r5,r4 + b _copy_loop + + + +#================================================================== +#This is a routine called by _memory_copy and _compare_NM_16 + +_load_NM: + + cmpwi cr5,r10,4 #compare code type and 4(rn Operations) in cr5 + + rlwinm r17,r9,6,26,29 #Extracts N*4 + cmpwi r17,0x3C + lwzx r17,r7,r17 #Loads rN value in r17 + bne +8 + mr r17,r14 #lf N==0xF then source address=(ba/po)(+XXXXXXXX, CT5) + + beq cr5,+8 + lhz r17,0(r17) #...and lf CT5 then N = 16 bits at [XXXXXX+base address] + + rlwinm r9,r9,10,26,29 #Extracts M*4 + cmpwi r9,0x3C + lwzx r9,r7,r9 #Loads rM value in r9 + bne +8 + mr r9,r14 #lf M==0xF then dest address=(ba/po)(+XXXXXXXX, CT5) + + beq cr5,+8 + lhz r9,0(r9) #...and lf CT5 then M = 16 bits at [XXXXXX+base address] + + + blr + +#CT5=============================================================== +#16bits conditional (0,1,2,3): A0XXXXXX NM00YYYY (unknown values) +#16bits conditional (4,5,6,7): A8XXXXXX ZZZZYYYY (counter) + +#sub codes types 0,1,2,3 compare [rN] with [rM] (both 16bits values) +#lf register == 0xF, the value at [base address+XXXXXXXX] is used. + +_compare16_NM_counter: + cmpwi r5,4 + bge _compare16_counter + +_compare16_NM: + + mr r9,r4 #r9=NM00YYYY + + add r14,r3,r12 #r14 = XXXXXXXX+(ba/po) + + rlwinm r14,r14,0,0,30 #16bits align (base address+XXXXXXXX) + + bl _load_NM #r17 = N's value, r9 = M's value + + nor r4,r4,r4 #r4=!r4 + rlwinm r4,r4,0,16,31 #Extracts !YYYY + + and r11,r9,r4 #r3 = (M AND !YYYY) + and r4,r17,r4 #r4 = (N AND !YYYY) + + b _conditional + + +_compare16_counter: + rlwinm r11,r3,28,16,31 #extract counter value from r3 in r11 + b _conditional + +#================================================================== +#execute (0) : C0000000 NNNNNNNN = execute +#hook1 (2) : C4XXXXXX NNNNNNNN = insert instructions at XXXXXX +#hook2 (3) : C6XXXXXX YYYYYYYY = branch from XXXXXX to YYYYYY +#on/off (6) : CC000000 00000000 = on/off switch +#range check (7) : CE000000 XXXXYYYY = is ba/po in XXXX0000-YYYY0000 +#================================================================== + +_hook_execute: + mr r26,r4 #r18 = 0YYYYYYY + rlwinm r4,r4,3,0,28 #r4 = NNNNNNNN*8 = number of lines (and not number of bytes) + bne- cr4,_hook_addresscheck #lf sub code type != 0 + bne- cr7,_skip_and_align + +_execute: + mtlr r15 + blrl + +_skip_and_align: + add r15,r4,r15 + addi r15,r15,7 + rlwinm r15,r15,0,0,28 #align 64-bit + b _readcodes + + +_hook_addresscheck: + + cmpwi cr4,r5,3 + bgt- cr4,_addresscheck1 #lf sub code type ==6 or 7 + lis r5,0x4800 + add r12,r3,r12 + rlwinm r12,r12,0,0,29 #align address + + bne- cr4,_hook1 #lf sub code type ==2 + + +_hook2: + bne- cr7,_readcodes + + rlwinm r4,r26,0,0,29 #address &=0x01FFFFFC + + sub r4,r4,r12 #r4 = to-from + rlwimi r5,r4,0,6,29 #r5 = (r4 AND 0x03FFFFFC) OR 0x48000000 + rlwimi r5,r3,0,31,31 #restore lr bit + stw r5,0(r12) #store opcode + b _readcodes + +_hook1: + bne- cr7,_skip_and_align + + sub r9,r15,r12 #r9 = to-from + rlwimi r5,r9,0,6,29 #r5 = (r9 AND 0x03FFFFFC) OR 0x48000000 + stw r5,0(r12) #stores b at the hook place (over original instruction) + addi r12,r12,4 + add r11,r15,r4 + subi r11,r11,4 #r11 = address of the last work of the hook1 code + sub r9,r12,r11 + rlwimi r5,r9,0,6,29 #r5 = (r9 AND 0x03FFFFFC) OR 0x48000000 + stw r5,0(r11) #stores b at the last word of the hook1 code + b _skip_and_align + + +_addresscheck1: + cmpwi cr4,r5,6 + beq cr4,_onoff + b _conditional +_addresscheck2: + + rlwinm r12,r12,16,16,31 + rlwinm r4,r26,16,16,31 + rlwinm r26,r26,0,16,31 + cmpw r12,r4 + blt _skip + cmpw r12,r26 + bge _skip + b _readcodes + + +_onoff: + rlwinm r5,r26,31,31,31 #extracts old exec status (x b a) + xori r5,r5,1 + andi. r3,r8,1 #extracts current exec status + cmpw r5,r3 + beq _onoff_end + rlwimi r26,r8,1,30,30 + xori r26,r26,2 + + + + rlwinm. r5,r26,31,31,31 #extracts b + beq +8 + + xori r26,r26,1 + + + stw r26,-4(r15) #updates the code value in the code list + + +_onoff_end: + rlwimi r8,r26,0,31,31 #current execution status = a + + b _readcodes + +#================================================================== +#Full terminator (0) = E0000000 XXXXXXXX = full terminator +#Endlfs/Else (1) = E2T000VV XXXXXXXX = endlfs (+else) +#End code handler = F0000000 00000000 + +_terminator_onoff_: + cmpwi r11,0 #lf code type = 0xF + beq _notTerminator + cmpwi r5,1 + beq _asmTypeba + cmpwi r5,2 + beq _asmTypepo + cmpwi r5,3 + beq _patchType + b _exitcodehandler + _asmTypeba: + rlwinm r12,r6,0,0,6 # use base address + _asmTypepo: + rlwinm r23,r4,8,24,31 # extract number of half words to XOR + rlwinm r24,r4,24,16,31 # extract XOR checksum + rlwinm r4,r4,0,24,31 # set code value to number of ASM lines only + bne cr7,_goBackToHandler #skip code if code execution is set to false + rlwinm. r25,r23,0,24,24 # check for negative number of half words + mr r26,r12 # copy ba/po address + add r26,r3,r26 # add code offset to ba/po code address + rlwinm r26,r26,0,0,29 # clear last two bits to align address to 32-bit + beq _positiveOffset # if number of half words is negative, extra setup needs to be done + extsb r23,r23 + neg r23,r23 + mulli r25,r23,2 + addi r25,r25,4 + subf r26,r25,r26 + _positiveOffset: + cmpwi r23,0 + beq _endXORLoop + li r25,0 + mtctr r23 + _XORLoop: + lhz r27,4(r26) + xor r25,r27,r25 + addi r26,r26,2 + bdnz _XORLoop + _endXORLoop: + cmpw r24,r25 + bne _goBackToHandler + b _hook_execute + _patchType: + rlwimi r8,r8,1,0,30 #r8<<1 and current execution status = old execution status + bne cr7,_exitpatch #lf code execution is set to false -> exit + rlwinm. r23,r3,22,0,1 + bgt _patchfail + blt _copytopo + _runpatch: + rlwinm r30,r3,0,24,31 + mulli r30,r30,2 + rlwinm r23,r4,0,0,15 + xoris r24,r23,0x8000 + cmpwi r24,0 + bne- _notincodehandler + ori r23,r23,0x3000 + _notincodehandler: + rlwinm r24,r4,16,0,15 + mulli r25,r30,4 + subf r24,r25,r24 + _patchloop: + li r25,0 + _patchloopnext: + mulli r26,r25,4 + lwzx r27,r15,r26 + lwzx r26,r23,r26 + addi r25,r25,1 + cmplw r23,r24 + bgt _failpatchloop + cmpw r25,r30 + bgt _foundaddress + cmpw r26,r27 + beq _patchloopnext + addi r23,r23,4 + b _patchloop + _foundaddress: + lwz r3,-8(r15) + ori r3,r3,0x300 + stw r3,-8(r15) + stw r23,-4(r15) + mr r16,r23 + b _exitpatch + _failpatchloop: + lwz r3,-8(r15) + ori r3,r3,0x100 + stw r3,-8(r15) + _patchfail: + ori r8,r8,1 #r8|=1 (execution status set to false) + b _exitpatch + _copytopo: + mr r16,r4 + _exitpatch: + rlwinm r4,r3,0,24,31 # set code to number of lines only + _goBackToHandler: + mulli r4,r4,8 + add r15,r4,r15 # skip the lines of the code + b _readcodes + _notTerminator: + +_terminator: + bne cr4,+12 #check lf sub code type == 0 + li r8,0 #clear whole code execution status lf T=0 + b +20 + + rlwinm. r9,r3,0,27,31 #extract VV +# bne +8 #lf VV!=0 +# bne- cr7,+16 + + rlwinm r5,r3,12,31,31 #extract "else" bit + + srw r8,r8,r9 #r8>>VV, meaning endlf VV lfs + + rlwinm. r23,r8,31,31,31 + bne +8 # execution is false if code execution >>, so don't invert code status + xor r8,r8,r5 #lf 'else' is set then invert current code status + +_load_baseaddress: + rlwinm. r5,r4,0,0,15 + beq +8 + mr r6,r5 #base address = r4 + rlwinm. r5,r4,16,0,15 + beq +8 + mr r16,r5 #pointer = r4 + b _readcodes + +#================================================================== + +frozenvalue: #frozen value, then LR +.long 0,0 +dwordbuffer: +.long 0,0 +rem: +.long 0 +bpbuffer: +.long 0 #inst address to bp on +.long 0 #data address to bp on +.long 0 #alignement check +.long 0 #counter for alignement + +regbuffer: +.space 72*4 + +.align 3 + +codelist: +.space 2*4 +.end + + diff --git a/src/wm_map.cpp b/src/wm_map.cpp index ad3500d..4520a00 100644 --- a/src/wm_map.cpp +++ b/src/wm_map.cpp @@ -26,8 +26,6 @@ int dWMMap_c::onCreate() { return false; } - testID++; - data = (WMSceneDataHeader*)scnRes; SpammyReport("Loaded resource: %d nodes\n", data->nodeCount); -- cgit v1.2.3