summaryrefslogtreecommitdiff
path: root/doc/tinyproxy.conf
diff options
context:
space:
mode:
authorMukund Sivaraman <muks@banu.com>2009-09-13 04:04:18 +0530
committerMukund Sivaraman <muks@banu.com>2009-09-13 04:04:18 +0530
commitc44264ddaa770f6c7ad9c5c81991689917e71784 (patch)
tree4e64e81eb6d05e00c3b4251cb8b02bf795fdc6c0 /doc/tinyproxy.conf
parent4cbc6b0359dcac8d3c6165433db8f220c70097bf (diff)
downloadtinyproxy-c44264ddaa770f6c7ad9c5c81991689917e71784.tar.gz
tinyproxy-c44264ddaa770f6c7ad9c5c81991689917e71784.zip
doc: Move doc/tinyproxy.conf to etc/ directory
Diffstat (limited to 'doc/tinyproxy.conf')
-rw-r--r--doc/tinyproxy.conf301
1 files changed, 0 insertions, 301 deletions
diff --git a/doc/tinyproxy.conf b/doc/tinyproxy.conf
deleted file mode 100644
index 1711ebd..0000000
--- a/doc/tinyproxy.conf
+++ /dev/null
@@ -1,301 +0,0 @@
-##
-## tinyproxy.conf -- tinyproxy daemon configuration file
-##
-
-#
-# User/Group: This allows you to set the username and group that will be
-# used for tinyproxy after the initial binding to the port has been done
-# as the root user.
-#
-# Please note that you may not use UID/GID's here.
-#
-User nobody
-Group nobody
-
-#
-# Port: Specify the port which tinyproxy will listen on. Please note
-# that should you choose to run on a port lower than 1024 you will need
-# to start tinyproxy using root.
-#
-Port 8888
-
-#
-# Listen: If you have multiple interfaces this allows you to bind to
-# only one. If this is commented out, tinyproxy will bind to all
-# interfaces present.
-#
-#Listen 192.168.0.1
-
-#
-# Bind: This allows you to specify which interface will be used for
-# outgoing connections. This is useful for multi-home'd machines where
-# you want all traffic to appear outgoing from one particular interface.
-#
-#Bind 192.168.0.1
-
-#
-# BindSame: If enabled, tinyproxy will bind the outgoing connection to the
-# ip address of the incoming connection.
-#
-#BindSame yes
-
-#
-# Timeout: The maximum number of seconds of inactivity a connection is
-# allowed to have before it is closed by tinyproxy.
-#
-Timeout 600
-
-#
-# ErrorFile: Defines the HTML file to send when a given HTTP error
-# occurs. You will probably need to customize the location to your
-# particular install. The usual locations to check are:
-# /usr/local/share/tinyproxy
-# /usr/share/tinyproxy
-# /etc/tinyproxy
-#
-#ErrorFile 404 "/usr/share/tinyproxy/404.html"
-#ErrorFile 400 "/usr/share/tinyproxy/400.html"
-#ErrorFile 503 "/usr/share/tinyproxy/503.html"
-#ErrorFile 403 "/usr/share/tinyproxy/403.html"
-#ErrorFile 408 "/usr/share/tinyproxy/408.html"
-
-#
-# DefaultErrorFile: The HTML file that gets sent if there is no
-# HTML file defined with an ErrorFile keyword for the HTTP error
-# that has occured.
-#
-DefaultErrorFile "/usr/share/tinyproxy/default.html"
-
-#
-# StatFile: The HTML file that gets sent when a request is made
-# for the stathost. If this file doesn't exist a basic page is
-# hardcoded in tinyproxy.
-#
-StatFile "/usr/share/tinyproxy/stats.html"
-
-#
-# Logfile: Allows you to specify the location where information should
-# be logged to. If you would prefer to log to syslog, then disable this
-# and enable the Syslog directive. These directives are mutually
-# exclusive.
-#
-Logfile "/var/log/tinyproxy.log"
-
-#
-# Syslog: Tell tinyproxy to use syslog instead of a logfile. This
-# option must not be enabled if the Logfile directive is being used.
-# These two directives are mutually exclusive.
-#
-#Syslog On
-
-#
-# LogLevel:
-#
-# Set the logging level. Allowed settings are:
-# Critical (least verbose)
-# Error
-# Warning
-# Notice
-# Connect (to log connections without Info's noise)
-# Info (most verbose)
-#
-# The LogLevel logs from the set level and above. For example, if the
-# LogLevel was set to Warning, than all log messages from Warning to
-# Critical would be output, but Notice and below would be suppressed.
-#
-LogLevel Info
-
-#
-# PidFile: Write the PID of the main tinyproxy thread to this file so it
-# can be used for signalling purposes.
-#
-PidFile "/var/run/tinyproxy.pid"
-
-#
-# XTinyproxy: Include the X-Tinyproxy header, which has the client's IP
-# address when connecting to the sites listed.
-#
-#XTinyproxy mydomain.com
-
-#
-# Upstream:
-#
-# Turns on upstream proxy support.
-#
-# The upstream rules allow you to selectively route upstream connections
-# based on the host/domain of the site being accessed.
-#
-# For example:
-# # connection to test domain goes through testproxy
-# upstream testproxy:8008 ".test.domain.invalid"
-# upstream testproxy:8008 ".our_testbed.example.com"
-# upstream testproxy:8008 "192.168.128.0/255.255.254.0"
-#
-# # no upstream proxy for internal websites and unqualified hosts
-# no upstream ".internal.example.com"
-# no upstream "www.example.com"
-# no upstream "10.0.0.0/8"
-# no upstream "192.168.0.0/255.255.254.0"
-# no upstream "."
-#
-# # connection to these boxes go through their DMZ firewalls
-# upstream cust1_firewall:8008 "testbed_for_cust1"
-# upstream cust2_firewall:8008 "testbed_for_cust2"
-#
-# # default upstream is internet firewall
-# upstream firewall.internal.example.com:80
-#
-# The LAST matching rule wins the route decision. As you can see, you
-# can use a host, or a domain:
-# name matches host exactly
-# .name matches any host in domain "name"
-# . matches any host with no domain (in 'empty' domain)
-# IP/bits matches network/mask
-# IP/mask matches network/mask
-#
-#Upstream some.remote.proxy:port
-
-#
-# MaxClients: This is the absolute highest number of threads which will
-# be created. In other words, only MaxClients number of clients can be
-# connected at the same time.
-#
-MaxClients 100
-
-#
-# MinSpareServers/MaxSpareServers: These settings set the upper and
-# lower limit for the number of spare servers which should be available.
-#
-# If the number of spare servers falls below MinSpareServers then new
-# server processes will be spawned. If the number of servers exceeds
-# MaxSpareServers then the extras will be killed off.
-#
-MinSpareServers 5
-MaxSpareServers 20
-
-#
-# StartServers: The number of servers to start initially.
-#
-StartServers 10
-
-#
-# MaxRequestsPerChild: The number of connections a thread will handle
-# before it is killed. In practise this should be set to 0, which
-# disables thread reaping. If you do notice problems with memory
-# leakage, then set this to something like 10000.
-#
-MaxRequestsPerChild 0
-
-#
-# Allow: Customization of authorization controls. If there are any
-# access control keywords then the default action is to DENY. Otherwise,
-# the default action is ALLOW.
-#
-# The order of the controls are important. All incoming connections are
-# tested against the controls based on order.
-#
-Allow 127.0.0.1
-
-#
-# ViaProxyName: The "Via" header is required by the HTTP RFC, but using
-# the real host name is a security concern. If the following directive
-# is enabled, the string supplied will be used as the host name in the
-# Via header; otherwise, the server's host name will be used.
-#
-ViaProxyName "tinyproxy"
-
-#
-# Filter: This allows you to specify the location of the filter file.
-#
-#Filter "/etc/tinyproxy/filter"
-
-#
-# FilterURLs: Filter based on URLs rather than domains.
-#
-#FilterURLs On
-
-#
-# FilterExtended: Use POSIX Extended regular expressions rather than
-# basic.
-#
-#FilterExtended On
-
-#
-# FilterCaseSensitive: Use case sensitive regular expressions.
-#
-#FilterCaseSensitive On
-
-#
-# FilterDefaultDeny: Change the default policy of the filtering system.
-# If this directive is commented out, or is set to "No" then the default
-# policy is to allow everything which is not specifically denied by the
-# filter file.
-#
-# However, by setting this directive to "Yes" the default policy becomes
-# to deny everything which is _not_ specifically allowed by the filter
-# file.
-#
-#FilterDefaultDeny Yes
-
-#
-# Anonymous: If an Anonymous keyword is present, then anonymous proxying
-# is enabled. The headers listed are allowed through, while all others
-# are denied. If no Anonymous keyword is present, then all headers are
-# allowed through. You must include quotes around the headers.
-#
-# Most sites require cookies to be enabled for them to work correctly, so
-# you will need to allow Cookies through if you access those sites.
-#
-#Anonymous "Host"
-#Anonymous "Authorization"
-#Anonymous "Cookie"
-
-#
-# ConnectPort: This is a list of ports allowed by tinyproxy when the
-# CONNECT method is used. To disable the CONNECT method altogether, set
-# the value to 0. If no ConnectPort line is found, all ports are
-# allowed (which is not very secure.)
-#
-# The following two ports are used by SSL.
-#
-ConnectPort 443
-ConnectPort 563
-
-#
-# Configure one or more ReversePath directives to enable reverse proxy
-# support. With reverse proxying it's possible to make a number of
-# sites appear as if they were part of a single site.
-#
-# If you uncomment the following two directives and run tinyproxy
-# on your own computer at port 8888, you can access Google using
-# http://localhost:8888/google/ and Wired News using
-# http://localhost:8888/wired/news/. Neither will actually work
-# until you uncomment ReverseMagic as they use absolute linking.
-#
-#ReversePath "/google/" "http://www.google.com/"
-#ReversePath "/wired/" "http://www.wired.com/"
-
-#
-# When using tinyproxy as a reverse proxy, it is STRONGLY recommended
-# that the normal proxy is turned off by uncommenting the next directive.
-#
-#ReverseOnly Yes
-
-#
-# Use a cookie to track reverse proxy mappings. If you need to reverse
-# proxy sites which have absolute links you must uncomment this.
-#
-#ReverseMagic Yes
-
-#
-# The URL that's used to access this reverse proxy. The URL is used to
-# rewrite HTTP redirects so that they won't escape the proxy. If you
-# have a chain of reverse proxies, you'll need to put the outermost
-# URL here (the address which the end user types into his/her browser).
-#
-# If not set then no rewriting occurs.
-#
-#ReverseBaseURL "http://localhost:8888/"
-
-
-